Self Service Concept

The Rusoh™ Eliminator™ Self Service Concept

The Rusoh™ Eliminator™ fire extinguisher is designed for self service.  It eliminates the need for the specially trained and equipped licensed technician required for traditional extinguishers.  That need is based on two concerns: 1) maintaining the stored pressure in the extinguisher at the 185-205 psi levels required to fight a fire and 2) maintaining the otherwise inaccessible agent chemical inside the extinguisher in a fluffed (fluid) state.
 
Concern 1: Correct Pressure Unlike traditional pressure extinguishers, The Rusoh™ Eliminator™ fire extinguisher’s contents are not stored under pressure.    The Rusoh™ Eliminator™ is only pressurized when you need it:  to fight a fire.  The source of the pressure is a CO2 cartridge you can check with ease and even replace yourself.  It simply screws in place. 

Concern 2: Fluffed Agent Maintaining the agent chemical inside the extinguisher in a fluid state is critical for both the Rusoh™ Eliminator™ and standard extinguishers.  Fine particles in the chemical naturally compact and become dense, potentially making discharge ineffective and putting you and your business at risk.  

Regulations for a standard extinguisher require a trained technician to periodically tear down extinguishers. The technician depressurizes the extinguisher, empties and replaces the chemical agent, and then re-pressurizes the unit.  

In contrast, the Rusoh™ Eliminator™ extinguisher’s chemical agent is fully accessible to the user via the patented Rusoh™ fluffing wheel located at the bottom of the extinguisher.  The Rusoh™ wheel eliminates the need for the technician.  By periodically turning the fluffing wheel, you can yourself maintain the powder in a fluid state.  The Rusoh™ fluffing wheel is connected to an auger that fluffs the chemical, insuring that the agent will flow freely when needed to put out a fire.